Draw-tite 20174 LIGHT KIT Manuel d'utilisateur télécharger pdf

WIRING INSTALLATION INSTRUCTIONS FOR METAL

CARGO TRAY

1. Place grommets into opening on rear of cargo

tray on each side.

2. Check to make sure the grommet is seated

correctly from the inside of the carrier.

3. Firmly press tail lamp housings into grommets

on both sides of cargo tray.

5. Plug the harness into the back of the tail lamp

housing.

8. Route 4-flat to the front of the tray and avoid any

locations that could cut or pinch the wires.

20174-098 REV-A 5-30-03

4. Route the 3-way plug with a Yellow wire from

under the cargo tray up through the steel grate

directly behind the tail lamp housing on driver

side of the cargo tray.

6. Route the 3-way plug with Green wire under the

cargo tray over to the passenger side tail lamp.

Repeat step 5 for this plug.

7. Cover wires with black tubing and secure the

harness with cable ties to the bottom of the tray.

CARGO TRAY 1

Résumé du contenu

Page 1 - CARGO TRAY

WIRING INSTALLATION INSTRUCTIONS FOR METALCARGO TRAY1. Place grommets into opening on rear of cargo tray on each side.2. Check to make sure the gromme

Commentaires sur ces manuels

Pas de commentaire

Draw-tite 20174 LIGHT KIT Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Draw-tite 20174 LIGHT KIT. Draw-Tite 20174 LIGHT KIT User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Draw-tite 20174 LIGHT KIT