Draw-tite 75519 MAX-FRAME RECEIVER Manuel d'utilisateur télécharger pdf

Installation Instructions

Mitsubishi Endeavor

Part Numbers:

75519

44561

87428

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 12mm, 17mm

Drill Bits: None

Rev. A12-13-0675519NSheet 1 of 3

z 2006 Cequent Towing Products

7/16” Conical Toother WasherQty. (6)

M10 X 1.25 X 30mm Hex BoltQty. (6)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 75519F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

350 (159 kg)3500 (1589 kg)

Weight Carrying

Ball Mount

NANA

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location: SUV1, SUV2

Form: F205 Rev A 5-6-05

1. Lower the vehicle exhaust by removing the rubber isolator.

2. Raise hitch into position and align with existing weldnuts in the frame rails.

3. Loosely install the M10 X 1.25 X 30mm hex bolts and conical toothed washers on passenger side of vehicle.

4. Install fasteners on driver side of vehicle and tighten all fasteners.

5. Raise exhaust back into position by re-installing rubber isolator.

Fascia

Tighten all M10 CL10.9 fasteners with torque wrench to 53 Lb.-Ft. (72 N*M)

Frame Rail

Existing weldnuts

both sides of vehicle

Frame Rail

1 2 3

Résumé du contenu

Page 1 - Installation Instructions

Installation InstructionsMitsubishi EndeavorPart Numbers:75519 44561 87428Hitch Shown In Proper PositionEquipment Required:Wrenches: 12mm, 17mmDrill B

Page 2 - Instructions d’installation

Instructions d’installationMitsubishi EndeavorNuméros de pièces :75519 44561 87428ATTELAGE MONTRÉ DANS LA POSITION APPROPRIÉEÉquipement requis :Clés :

Page 3 - Instrucciones de instalación

Instrucciones de instalaciónMitsubishi EndeavorNúmeros de partes:75519 44561 87428El enganche se muestra en la posición correctaEquipo necesario:Llave

Commentaires sur ces manuels

Pas de commentaire

Draw-tite 75519 MAX-FRAME RECEIVER Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Draw-tite 75519 MAX-FRAME RECEIVER. Draw-Tite 75519 MAX-FRAME RECEIVER User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Draw-tite 75519 MAX-FRAME RECEIVER