Draw-tite 65031 FRONT MOUNT RECEIVER Manuel d'utilisateur télécharger pdf

Existing Weldnuts

Frame Rail

Access Hole

Front Mounted Receiver

Installation Instructions

Toyota Tundra

Toyota Sequoia

Part Numbers:

65031

1. Remove skid plates and tow hooks from vehicle and return to customer.

2. Raise receiver into position and install four (4) M12 bolts.

3. Using receiver as a template, drill two (2) holes in frame.

4. Insert handle nuts thru access holes in frame and install two (2) 1/2”-13 bolts as shown.

Tighten all 1/2” GR5 fasteners with torque wrench to 50 Lb.-Ft (68 N-m).

Rev. A11-07-05N65031Sheet 1 of 3

z 2005 Cequent Towing Products

Conical Washer, 1/2”Qty. (4)

Flat Washer, 1/2”Qty. (2)

Hex Bolt, M12 x 1.25 x 35Qty. (4)

Lock Washer, 1/2”Qty. (2)

Handle Nut, 1/2”Qty. (2)

Hex Bolt, 1/2”-13 x 1-3/4”Qty. (2)

Tighten all M12 CL8.8 fasteners with torque wrench to 68 Lb.-Ft (92 N-m).

Equipment Required:

Wrenches: 3/4”, 18mm, 19mm

Drill Bits: 1/2”

Fastener Kit: F65031

CARGO CAPACITY – DO NOT EXCEED

500 LB. OR VEHICLE FRONT GROSS

AXLE WEIGHT RATING. (GAWR)

LB. MAX. WINCH LINE PULL

9000

Frame Rail

Fascia

Receiver Shown In Proper Position

Hitch Requires 5/8” Pin and Clip

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. A hitch or ball which has been damaged should be removed and replaced.

Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. Do not cut, weld, or

modify hitch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

1 2 3

Résumé du contenu

Page 1 - Installation Instructions

Existing WeldnutsFrame RailAccess HoleFront Mounted ReceiverInstallation InstructionsToyota TundraToyota SequoiaPart Numbers:650311. Remove skid plate

Page 2 - Instructions d’installation

Écrous à souder existantsLongeron (cadre)de châssisTrou d’accèsRécepteur à montage sur l’avantInstructions d’installationToyota TundraToyota SequoiaNu

Page 3 - Instrucciones de instalación

Tuercas de soldar existentesLarguero del bastidorOrificio de accesoReceptor frontalInstrucciones de instalaciónToyota TundraToyota SequoiaNúmeros de p

Commentaires sur ces manuels

Pas de commentaire

Draw-tite 65031 FRONT MOUNT RECEIVER Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Draw-tite 65031 FRONT MOUNT RECEIVER. Draw-Tite 65031 FRONT MOUNT RECEIVER User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Draw-tite 65031 FRONT MOUNT RECEIVER