Draw-tite 65028 FRONT MOUNT RECEIVER Manuel d'utilisateur télécharger pdf

Front Mounted Receiver

Installation Instructions

Chevrolet Silverado 2500/2500HD/3500 2 & 4WD, Suburban 2500 2 & 4WD

GMC Sierra 2500/2500HD/3500 2 & 4WD, Yukon XL 2500 2 & 4WD

(Vehicles With Amber Turn Signals)

Part Numbers:

65028

1. If vehicle is equipped with OEM tow hooks remove tow hook fasteners from inside of frame and bottom of frame and return to vehicle

owner.

2. Raise hitch into position and install fasteners as shown above. Use 1/2" flat washers as spacers between hitch and side of frame if necessary.

3. Due to variations in tow hook mounting holes, it may be necessary to enlarge 1/2" holes in hitch to 9/16" holes.

NOTE: Fascia trimming is optional on 2500 h.D./3500 models. CONSULT VEHICLE OWNER BEFORE TRIMMING.

Tighten all M12 CL10.9 fasteners with torque wrench to 75 Lb.-Ft (102 N-m).

Rev. B6-23-06N65028Sheet 1 of 3

z 2006 Cequent Towing Products

Flat Washer, 1/2”Qty. (2)

Lock Washer, 1/2”Qty. (2)

Hex Nut, M12Qty. (4)

Spacer, 2” x 1.5” x 1/4”Qty. (2)

Hex Nut, 1/2”Qty. (2)

Carriage Bolt, 1/2”-13 x 1-3/4”Qty. (2)

Conical Washer, 1/2”Qty. (4)

Hex Nut, M12 x 1.75 x 45Qty. (4)

Tighten all 1/2” GR5 fasteners with torque wrench to 75 Lb.-Ft (102 N-m).

CARGO CAPACITY – DO NOT EXCEED

500 LB. OR VEHICLE FRONT GROSS

AXLE WEIGHT RATING. (GAWR)

LB. MAX. WINCH LINE PULL

9000

Wrenches: 3/4”, 7/8”, 18mm

Equipment Required:

Drill Bits: 9/16”

Fastener Kit: K65028

Pull Wire

Frame Rail

Tow Hook

Vehicles Without

OEM Tow Hooks

Vehicles Without

OEM Tow Hooks

Vehicles With

OEM Tow Hooks

Vehicles With

OEM Tow Hooks

Orient Spacer

As Shown

Fascia Has To Be

Pushed Up 1-1/2”

on 2002 And

Later Vehicles

Receiver Shown In Proper Position

Hitch Requires 5/8” Pin and Clip

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. A hitch or ball which has been damaged should be removed and replaced.

Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. Do not cut, weld, or

modify hitch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

1 2 3

Résumé du contenu

Page 1 - Installation Instructions

Front Mounted ReceiverInstallation InstructionsChevrolet Silverado 2500/2500HD/3500 2 & 4WD, Suburban 2500 2 & 4WDGMC Sierra 2500/2500HD/3500

Page 2 - Instructions d’installation

Récepteur à montage sur l’avantInstructions d’installationChevrolet Silverado 2500/2500HD/3500 2 et 4WD, Suburban 2500 2 et 4WDGMC Sierra 2500/2500HD/

Page 3 - Instrucciones de instalación

Receptor frontalInstrucciones de instalaciónChevrolet Silverado 2500/2500HD/3500 2 y 4WD, Suburban 2500 2 y 4WDGMC Sierra 2500/2500HD/3500 2 y 4WD, Yu

Commentaires sur ces manuels

Pas de commentaire

Draw-tite 65028 FRONT MOUNT RECEIVER Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Draw-tite 65028 FRONT MOUNT RECEIVER. Draw-Tite 65028 FRONT MOUNT RECEIVER User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Draw-tite 65028 FRONT MOUNT RECEIVER